SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Industrial Jib
Industrial Jib - The forklift jib would enable a worker to be able to shift their very heavy heaps overtop of obstacles or obstructions on top of roofs, elevated platforms, and decks. They can be utilized in order to reach the second or even third level building platforms to be able to distribute or pick up loads at places which are still under construction. Fork truck jibs are actually utilized to be able to unload trucks and flatbed trailers, to suspend trusses and laminate wood. Jibs are even typically used for reaching over scaffolding for masonry work.
Each forklift jib attachment is equipped with two rotating hooks. One of the hooks can be manually connected on the base of the boom at whatever position while the other hook stays fixed at the end of the jib. This permits the person operating it to be able to lift objects that have two hook points. Dependent on the size of the model, every hook is rated at either 4000 or 6000 lbs. It's possible to make use of either a hook or two so as to lift a load. The individual operating it must ensure that the entire weight of the jib and the load doesn't go over the rated capability of the jib as shown on the load chart for that extended or retracted position.
Attachments jibs could be used on industrial forklifts, extendable-reach lift trucks, and on rough terrain straight-mast forklifts. The forklift jib cranes can be installed onto the forklift by way of inserting both of the forks into the fork pockets. The rear of the jib crane then seats against the rear of the fork and a safety chain wraps the forklift carriage to hold it into place.
Load Capacity for the Jib Boom Forklift Attachment
The load capacity of a forklift jib has a most of approximately 1935 lbs to 6000 lbs on either the retracted or extended positions range. You might want to discuss with a material handling specialist regarding the specific limits of your forklift use. The load capacity rankings are really intended for the jib itself and not the lift truck or the maximum load that could be lifted securely utilizing a particular forklift. It is very important bear in mind that at any time when any accessories like for instance a lift truck jib are connected to the forklift, the new center of gravity created by the accessory will decrease the general lift capacity of the forklift. There are instructions available which offer information on the way to correctly determine these load limits.
Fork Trucks & Fork lift Attachment Safe Usage
Before using whichever lift truck jib, be sure that the hooks and shackles are properly secured to the lift truck. Be sure and also double check that the pins are tight. It is imperative that the load calculations are correctly done and double checked. Bear in mind to consider the fact that rated capacities sometimes lessen when the boom is in a raised position, whenever the boom is fully extended with telehandlers or even each time the mast is tilted frontward.
A few vital suggestions about the adjustable jib are: never pull a load utilizing a lift truck jib attachment, because these attachments are actually designed for vertical lift only. All the time lift the load without letting it move to and fro. Utilize extreme caution any time a load is lifted to prevent tipping over the truck.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Burnaby, British Columbia
forkliftpartsburnaby.ca
Email Us
About Us